Tel: +44 (0) 1923 211000High quality affordable tooling and accessories

Horizontal/Vertical Rotary Table - HV-10
1001-003


Horizontal/Vertical Rotary Table - HV-10
1001-003

Price
£391.00 (plus VAT)


  • 1. Table is made of high density Mechanite and uses “HEIDENHAIN” electronic equipment to inspect angles to assure the excellent quality and durability.
  • 2. Using high quality machining centre to process. Fitted with high accuracy bearings. Stable under load cutting.
  • 3. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. Vernier scale makes settings down to 10 seconds possible.
  • 4. These rotary tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.
  • 5. Using the key guide block, the centre can be corrected both quickly and accurately.

TableGross Weight Kg
OuterdiameterHeightBaseDimensionWidth of T-slotBolt slotsWooden case (W)
Order No.A1DHH1ABeTypegCentre SleeveCarton (C)Meas. CFTCode No.
HV-47011080851451151112MT-2(C) 9.00.31001-000
HV-6

78

3.07

150

5.91

80

3.11

100

3.94

200

7.87

160

6.30

11

0.43

15

0.59

MT-2(C) 120.41001-001
HV-8

100

3.94

200

7.87

105

4.13

135

5.31

265

10.43

220

8.66

14

0.55

17

0.67

MT-3(C) 300.81001-002
HV-10

110

4.33

250

9.84

115

4.53

165

6.50

325

12.80

280

11.02

14

0.55

17

0.67

MT-3(C) 4521001-003
HV-12

130

5.12

300

11.81

135

5.32

195

7.68

388

15.27

330

12.99

16

0.63

18

0.71

MT-4(W) 852.610001-004
HV-14

130

5.12

350

13.78

140

5.51

230

9.06

450

17.72

380

14.95

16

0.63

18

0.71

MT-4(W) 1003.21001-005
HV-16

150

5.90

406

15.98

155

6.10

255

10.03

500

16.69

430

16.93

16

0.63

18

0.71

MT-4(W) 1354.21001-006

Test Report
Variation (inches) (mm)
Item No.Testing ObjectiveMaximum Tested
1Flatness of clamping surface (concave)0.0006(0.015)
2Paralleism of clamping surface to base0.0008(0.02)
3Squareness of clamping surface to angle face0.0008(0.02)
4True running of clamping surface0.0006(0.015)
5True running of centre hole
(1) Measured at hole edge(1)0.0008(0.02)  (1)
(2) measured at arbor 4in. long(2)0.0012(0.03)  (2)
6Indexing accuracy of direct indexing mechanism maximum cumulative spacing error45"


  • Model: 1001-003
  • Shipping Weight: 45Kgs







Copyright © 2019 Gate Tooling. Powered by Zen Cart
Fallen Leaf Design LTDWeb Design Bolton by Vizcom Powered by Zen Cart